Runic White Mage Crystal Wizard Staff

This is the first piece made with direct help from our new and first shop member other than myself. He debarked the wood, did most of the sanding and gave input into the overall design of the piece as well as assisting on other projects. It measures 65” or 5’5” from the base to the top of the glass crystal. Several pieces of amethyst were added along the underside of glass crystal for stability and aesthetic reasons, but really only the central stone remained visible of wrapping it with leather rawhide. The spiral running along the length of the staff was hand carved with a steel file and then highlighted with a silver paint pen and touches of copper too. Small blemishes and imperfections that didn’t come out with intense sanding were filled in with the copper paint to add a little more overall texture and nuance to the piece. Along the top of the spiral, I then used a wood burning tool to create the Elder Futhark rune set and the three larger runes symbolizing (from left to right) good luck, protection, and strength. There’s also a five pointed star and three sided knot on opposite sides of the top. I finished it by rubbing some boiled linseed oil along the length of the staff. And since I liked the accidental darkening effect of the oil on a previous staff (and because I already got some on the rawhide anyway) I applied some to the rawhide wrapping as well – which as I mentioned in another piece may not be the best idea, but shouldn’t be a problem for what the leather is being used for.

 

Artist: J.R. Goslant

https://www.etsy.com/shop/AstrolabeArts

 

https://www.facebook.com/AstrolabeArts/

Natural Wand

The wood of this wand is most likely birch, but was difficult to be certain because it’s also a “beaver chew,” also called a “beaver stick,” and has had the bark chewed off. But this process has left clear tooth marks on parts of the wand’s blade. The point of the wand was also created naturally by beavers.

Continuing with the strong natural theme of this wand I attached a quartz crystal to the bottom of the haft and used vines to help keep it secure. I also attached feathers I found, one from a blue jay, a cardinal, and a small yellow bird -probably some kind of finch. There’s a little detailing done with a wood-burner and bands of yellow, blue, and red hemp to match the colors of each feather.

It’s about 13.5” long and polished with boiled linseed oil.

Artist: J.R. Goslant

https://www.etsy.com/shop/AstrolabeArts

https://www.facebook.com/AstrolabeArts/

Knotted Haft Garnet Magic Wand

I’m very proud of this wand. When I came across the haft laying in some brush I knew it’d be perfect for wand-crafting.

The haft and blade are made from separate pieces of wood. After removing the bark from the knotted haft and shaping the blade I sanded them down, secured them together, and the whole wand a few coats of boiled linseed oil for protection and aesthetics. A garnet crystal was also embedded in the base of the haft.

Even though it’s a bit large for a wand at about 17” it’s well balanced with a comfortable, natural grip.

Artist: J.R. Goslant

https://www.etsy.com/shop/AstrolabeArts

https://www.facebook.com/AstrolabeArts/